SAFE HARNESS

With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.

X-VISION HD VIDEO SYSTEM

The "X-VISION" CCTV has been designed in order to be able to record underwater images with one, two three or four divers in the water. Its robust and modern design makes it stand out from other CCTVs.

PANEL CONTROL II 2 DIVERS

The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.

FESA CLOSED LIFT GEAR

Seaflex designed, developed and manufactured what we call the Fully Enclosed Variable Buoyancy System (FESA), which is ideal for operations involving lifting and towing elements.The FESA Seaflex balloon, originally designed for a Deep Sea Plow specific project, the FESA system is suitable for many other lifting and towing scenarios

MK5 SECURITY HARNESS

The “vest style” safety harness that distributes the load over the whole body. This harness supports the fully equipped diver safely and comfortably. With stainless steel straps and D-rings with high load capacity and bottom rings for tools or hookah closures.

SHARK-EYE CAMERA 700 LINES

High definition camera with stainless steel housing for use with a video cable or umbilical, focused on professional diving due to its resistance to harsh environments and its versatility.

PANEL CONTROL III 3 DIVERS

The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.

SQUARE CLOSED LIFT GEAR MBU

MBUs are the most practical alternative for lifting solid bodies in many situations and are exceptional in towing scenarios. Since they can be simply lifted from a single point and easily picked up by the crane without the risk of tearing the belt.

SHARK LIGHT LED

The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.

PANEL CONTROL I (2 Wires)

The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.

MARK IV JUMP JACKET HARNESS-BCD

Divers' ability to become neutrally buoyant, slightly positive, or slightly negative greatly aids the approach to the job site. It allows for a faster approach by a rescue diver, the ability to donate gas to the distressed diver (if his umbilical has been compromised), and a faster return through buoyancy control of both rescuer and patient

KMACS 5 NO COMMUNICATIONS

KMACS 5 NO COMMUNICATIONSThe Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations.

PANEL GAS KMACS5

The KMACS-5 is a lightweight, portable air supply, depth control and communications panel for two divers.

MK2 SAFE BOOTS

Divex MK2 work boots serve to improve diver safety and the life of all types of wetsuits, even in the most difficult conditions, protecting the lower extremities.

HSE PANEL 2 DIVERS (PORTABLE/FRAME MOUNTED), NO...

Synergy HSE two-diver inshore panels are built specifically for non-imca shore diving operations. Each diver has 1 independent HP supply line and 1 independent LP supply line per diver. Inlet and outlet fittings can be provided from the side, top or bottom of the panel. We can supply as a portable panel or mounted on a frame for permanent installation.

LIFTING BALLOONS OPEN W / VALVE

Parachute de levage ouvert subacqua: Parachute de levage I made in nylon avec des coutures renforcées et thermoscells pour eviter les fissures et les pertes d'air. Les attaches au ballon sont faites d'anneaux joints inoxydables au nylon au moyen d'un thermoscellage très robuste pour éviter les ruptures ou les déchirures

SRP PANEL 3 DIVERS IMCA

The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.

SRP 2 DIVERS PANEL IMCA

Synergy designed diving SRP's are one of our popular products and have been very well received in the diving industry. Manufactured with a stainless steel frame, 4 x 50 ltr x 200 bar lightweight carbon composite cylinders, all connected to an air management panel and the two diver panels for diver air supply and cylinder charging.

TWO DIVERS PORTABLE PANEL

The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.